|
|
Contact us |
1/3" Sharp CCD Image
Sensor * Water Resistant Cylindrical Monochrome IR Sensitive Camera with 3.6 mm
Board Lens & Swivel / Tilt Mounting Bracket
|
|
|

Need Sound ? click
here
Click on underlined
items for additional information
click
here for full list of lenses compatible with this Camera
Video System: CCIR fully compatible
with Australian TV System.
Image Device: 500 (H) x 582 (V) 291
000 Pixel 1/3 Inch Sharp Interline Transfer LOW BLEMISH CCD.
Scanning System: 2 : 1 Interlace CCIR
50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1 v p-p Composite Video
75 ohms, suit Australian TV, VCR, AV & Video inputs, RCA socket, ~ 45 cm cable.
Horizontal Resolution: ~ 450 lines
(this value is provided for comparative purposes only) Better than VHS * NEAR
Super-VHS resolution.
Minimum Illumination: ~ 0.05 lux @
F1.2 (this value is provided for comparative purposes only) * INFRA-RED
Sensitive See in the Dark with an
Infra-Red Illuminator.
Spectral Sensitivity: ~ 400 to ~ 1000
nm.
Automatic Electronic Shutter (AES):
1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds, additional
information
here.
Automatic Gain Control: Yes.
Signal to Noise ratio: ~ 48 dB.
Power Requirements: 12 Volts DC
Regulated, ~ 100 milliamps, 2.1 x 5.5 mm DC socket ~ 45 cm cable.
Dimensions: 23 mm Diameter, 52 mm
Long, ~ 55 grams.
Made in: Korea.
Manufacturer's Experience: 10 + Years
in CCTV.
Lenses compatible with
this Camera, Board (BL)
types on this page: 2.1, 2.9, 3.6, 4, 4.3, 5.7, 6, 8, 16 & 25 mm
Suitable ONLY if Lens Cover is Removed - Warranty is Void if Camera is opened.
Ancillary Products
Power-Up-Cable |
|||
Use your Browser "Back
Button" to return to previous page