CONDITIONS OF SALE

'AS NEW' items are Ex-Demo, Ex-Rental, Excess stock, Run-Out stock or Liquidation stock from businesses that have ceased trading. NEW ITEMS UNLESS OTHERWISE MARKED ARE IN GOOD CONDITION, HOWEVER AT THESE CLEARANCE PRICES THEY ARE SOLD WITHOUT ANY FURTHER GUARANTEE. Additional information may be available for some items.

Used items are untested unless otherwise marked and offered for-sale as-is, they may or may not work. Items marked WORKS have been briefly powered up to ascertain go : no-go condition and are offered for sale on that basis. Some items may have been tested further but not thoroughly.

For further information, please e-mail enquiry outlining specifically what information is required. We do not accept Telephone or Facsimile enquiries about Miscellaneous items.

*

Cat Code: KP-FS57 Genuine Sony Service Manual includes Circuits, Diagnostics & On Screen Setup via Remote Control, Convergence, etc, High Definition Television 57 inch, AG-3X Chassis for KP-FS57, M31, M61, M90, M91 models. $20

 

Cat Code: Goose-Stand

Desktop Microphone Stand with 30 cm Gooseneck and 3/8" x 16 TPI Adaptor. Ideal for holding a Video Camera or Lamp or fitted with a Clamp as a Third Hand. Excellent for Close-Up Video inspection of PCBs, Jewellery, Clock making, Video-Photography of Insects, Stamps, etc., etc. $20 - FOUR for $40

 

AUTOMATIC / ADJUSTABLE VIDEO LIGHT SOURCE

CIRCON MV9081 an INTENSE WHITE LIGHT SOURCE virtually eliminates uneven illumination and Hot-Spots during endoscopic video procedures, (daylight type colour temperature and characteristics) may be used with Fibre Optic Cable for Surgery with a Laparoscope or to illuminate objects using a Light-Guide / Ring with Microscopes, etc. Composite Video BNC Input and Output sockets to Automatically adjust Light Output based on Video Camera composite video output level, Manual & Automatic control modes. Click here for information about manufacturer's current model that uses the same 300 Watt Gemini GEC Arc Lamp. Works and has had very little use, NEW PRICE for CURRENT MODEL is ~ $10 000 + ONLY ! $100

*** This unit could be modified and used to convert an 8 mm or 16 mm Film Projector from an Incandescent Lamp (which produces poor Red Tinted whites) to project Daylight/Arc-White 35 mm Cinema type colour temperature images and/or for Large Screen Projection. The same Gemini 300 Watt GEC Arc Lamp is used in Bell & Howell's Professional 16 mm Film Projectors.

 

CLOSE UP LENS

S-type CLOSE UP LENS 43mm Dia +3 DIOPTER COSMICAR PENTAX focus at 333mm $30

S-type CLOSE UP LENS 49mm Dia +3 DIOPTER COSMICAR PENTAX focus at 333mm $30

Info @ Pentax

 

BNC/TNC Crimp Male Bulkhead Jack

Cat Code: Skt-TNC
TNC Crimp Bulkhead Jack TransRadio CRTBN 6/7A, Q93887N, B34585: $1

Cat Code: Skt-BNC
BNC Crimp Bulkhead Jack TransRadio CRTBN 6/7A, Q93753A, B35230: $1

 

Oscilloscope

Oscilloscope BWD 521 DUAL BEAM Twin Gun CRT  no Vertical Amps or Timebase. $100

 

Marconi TF-2604 Electronic (moving coil) Analog Multimeter

Virtually unmarked. Works ? $80

 

Lens Bell & Howell

Lens Bell & Howell 2.0 inch focal length, F1.2 $30

Lens Bell & Howell 3.0 inch focal length $40

 

MOTION PICTURE PROJECTOR bits

16mm Acetate Splicers AS NEW $20

Used XENON 3500 Watt Bulbs: UXL-3601 HK-O Ushio Xenon Bulb, as new ~ 65 hours use. UXL-3601 HK-O Ushio Xenon Bulb, as new ~ 1200 hours use, stable arc, clear glass.

Cinemeccanica Victoria 8 projector spares: Exciter Lamps, Genuine 6 Volt, 4.3 Amp new or as new. Take-Up Belt new. Motor Drive Belt new. 35 mm Intermittent Sprockets, new and used.

 

Hardware Paks Screws/Nuts/Bushing/Spacer

click on image to enlarge
All Dimensions are in mm & approximate
Cat Code: HW-PAK#1 Threads 1.8, Spacer/Bush 4.4 long, Screws 3.5 long. $10 - 24 piece 8x3 pack
Cat Code: HW-PAK#2 Threads 1.8, Spacer/Bush 6.4 long, Screws countersunk black 4.7 long chrome 5 long. $10 - 24 piece 8x3 pack
Cat Code: HW-PAK#3 Threads 1.8, Spacer/Bush 6 long excludes threaded section, Screw 5 long, Nut 1.5 thick 4 across flats. $20 - 72 piece 24x3 pack

TOOLS

Cat Code: CUT-21
5" Electrical Cutter & Trimmer, for PCB components, Carbon Steel, Black Oxide finish: $1